User Manual

40
Required Items:
• Fuselage assembly • Wing assembly
• Radiator scoop
• 1/4-20 x 2" nylon bolt (2)
Required Tools and Adhesives:
• Flat blade screwdriver
 Step
Locate the servo leads from the wing and plug them into
the leads for the ailerons located in the fuselage. These
leads are identical, so you can plug either of the aileron
servo leads into either of the extensions.
 Step
Guide the wing dowels at the front of the wing into the
holes located in the fuselage. Allow the wing to drop down
and rest in the wing saddle of the fuselage.
Note: Check to make sure the servo leads are
inside the fuselage and not caught between the
wing and fuselage.
 Step
Locate the two 1/4-20 x 2" nylon wing bolts. Slide the
bolts into the holes in the radiator scoop so the threads
are exposed.
 Step
Place the radiator scoop onto the wing, guiding the bolts
into the bolt holes in the wing. Use a flat blade screwdriver
to tighten bolts, securing the wing to the fuselage. It is
helpful to pull the back of the wing away from the fuselage
so you can guide the bolts into the holes in the fuselage
to start them threading into the holes.
Section 13: Attaching the Wing