User Manual

43
Rudder
Connect the rudder clevis to the center hole on the rudder
control horn.
Center the trim lever for the rudder on the transmitter.
Section 15: Centering the Control Surfaces
With the radio system on, thread the clevis until the
rudder is aligned with the fin. Slide the clevis retainer onto
the clevis to secure its location.
Ailerons
Turn on the transmitter, then the receiver. Move the aileron
stick to the right, which is the input for a right turn. The
right aileron will move up, and the left aileron will move
down. If not, check the radio instructions on how to
reverse the direction electronically at the transmitter.
Section 16: Checking the Control Surface Directions