User Manual

With the radio system on, move the trim lever and throttle

lever towards the bottom of the transmitter. Look into the

carburetor to check that the barrel is closed.

Move the trim lever up towards the top of the transmitter.

The barrel in the carburetor should have an opening of

around 1/16".

Move the throttle stick towards the top of the transmitter.

The carburetor will now be in the fully open position.

If the throttle is not operating as described, you may

need to change the Travel Adjustment setting in the

radio. To do so, read the section in the radio manual on

programming the radio.

Note: Once all the radio adjustments are

complete, remember to turn off both the

receiver and the transmitter.

Section 18: Adjusting the Throttle