User Manual
30
Required Parts
• Tail gear wire • Tail gear steering arm
• 5/32" wheel collar • 3mm setscrew
• Tail wheel (1
3
/
4
") • 3mm x 8mm screw
• Pushrod wire (31") • Clevis
• Clevis retainer • Tail gear cover
• 2mm x 6mm sheet metal screw (4)
Required Tools and Adhesives
• Threadlocking compound • Hobby knife
Step 1
Slide a clevis retainer onto a clevis. Thread the clevis
onto the 31" pushrod wire.
Step 2
Trim the steering arm so only one hole remains.
Step 3
Thread the 3mm x 8mm screw into the steering arm.
Attach the clevis to the steering arm as well.
Step 4
Slide the pushrod wire into the pushrod tube inside the
fuselage. Be patient, as it can be a little tricky.
Section 9: Tail Wheel Installation