User Manual

31
 Step 5
Position the steering arm in the bracket inside the
fuselage. Slide the tail gear wire through the bracket
and steering arm. Tighten the screw to secure the tail
gear wire.
Note: Check to make sure there is travel
both directions when the pushrod is used to
operate the tail wheel. Change the position
of the steering arm on the wire if necessary
to achieve decent travel in both directions.
 Step 6
Attach the tail gear cover using four 2mm x 6mm
wood screws.
 Step 7
Install the tail wheel and secure it using the 5/32"
wheel collar and 3mm setscrew.
Section 9: Tail Wheel Installation