User Manual

11Hangar 9 P-51D Mustang Sport 40 Assembly Manual
 Step 6
Repeat Steps 2 through 5 to install and connect the 26-inch
(660mm) rudder pushrod.
 Step 7
Slide a clevis retainer on one of the nylon clevises.
 Step 8
Thread the clevis 12-turns on the rudder pushrod. The exact
position of the clevis will be adjusted once the tail has been
bolted to the fuselage.
 Step 9
Thread the clevis 12-turns on the elevator pushrod. The
exact position of the clevis will be adjusted once the tail has
been bolted to the fuselage.
Installing the Tail Surfaces
Required Parts
Fuselage assembly Stabilizer/elevator
Rudder/fin Fin fairing block
Required Tools and Adhesives
Nut driver: 7/32-inch or adjustable wrench
Ruler
 Step 1
Remove the foam that protects the airframe from damage on
the rudder and elevator.