User Manual

22 Hangar 9 P-51D Mustang Sport 40 Assembly Manual
Installing the Electric Motor
Required Parts
Fuselage assembly Motor with hardware
#8 washer (4) #8 lockwasher (4)
Electronic speed control Motor battery
40mm motor standoff (4) 8-32 blind nut (4)
8-32 x 2
1
/
4
-inch machine screw (4)
Required Tools and Adhesives
Threadlock Phillips screwdriver: #2
Hook and loop tape
 Step 1
Locate the items to install the electric motor on the fuselage.
 Step 2
Secure the X-mount to the motor using the hardware
provided with the motor. Be sure to use threadlock on the
screws to prevent them from vibrating loose.
 Step 3
Slide a #8 lockwasher and #8 washer on the 8-32 x 2
1
/
4
-inch
machine screw. Prepare four screws at this time.
 Step 4
Secure the motor using the four screws prepared in the
previous step and four 40mm motor standoffs. You will
need to install the four 8-32 blind nuts behind the firewall
for the screws.
 Step 5
Secure the speed control inside the fuselage as shown. Pass
the leads for the motor through the narrow slot made in the
firewall at the beginning of this manual.