User Manual

28 Hangar 9 P-51D Mustang Sport 40 Assembly Manual
 Step 15
Secure the servo to the blocks using the screws provided
with the servo and a #1 Phillips screwdriver.
 Step 16
Tie the string located in the wing to the servo extension
for the servo.
 Step 17
Use the string to pull the servo lead through the wing.
Hint: If you are installing operational flaps, leave a loop
of string around the lead so it can be differentiated from
the flap servo lead.
 Step 18
Secure the servo cover to the wing using four #2 x 3/8-inch
self-tapping screws and a #1 Phillips screwdriver.
 Step 19
Insert the bend in the 2
5
/
8
-inch (67mm) aileron pushrod
through the hole in the servo horn that was enlarged back
in Step 3.
 Step 20
Slide a clevis retainer on a nylon clevis.