User Manual

6
Required Parts
• Landing gear w/wheels
• Landing gear strap (4)
• 2mm x 14mm screw (8)
Required Tools and Adhesives
• Phillips screwdriver (small)
Required Parts
• Fuselage • Propeller
Required Tools and Adhesives
• Phillips screwdriver (small)
 Step 1
Attach the propeller following the instructions provided
with your engine.
Note: Photo is shown using an acorn
nut installed instead of the standard propeller
nut and washer.
 Step 1
Position the landing gear to the bottom of the fuselage.
Secure the position of the gear using four landing gear
straps and eight 3mm x 10mm screws.
Section 2: Landing Gear Installation
Section 3: Propeller Installation