User Manual
7
Required Parts
• Stabilizer assembly • Fuselage
• #4 washer (4)
• 4-40 x 1/2" socket head screw (4)
Required Tools and Adhesives
• Hex wrench: 3/32" • Threadlock
Step 1
Slide the stabilizer halves into the slot in the fuselage.
Use four 4-40 x 1/2" screws and four #4 washers to
secure the stabilizer. Use threadlock to prevent the
screws from vibrating loose during flight.
Step 2
Attach the elevator clevises to the elevator control horns.
Step 8
Attach the four connectors to the brass fittings of the
stabilizer. The cables should have very light tension.
Section 4: Installing the Stabilizer