User Manual

13
 Step 9
Use the hook and loop straps to secure the battery inside
the fuselage.
Note: If you find the battery slides forward or
backward, simply apply a piece of hook and
loop material on the battery floor and battery to
keep the battery in position.
 Step 10
Plug the speed control into the throttle channel of the
receiver. Move the throttle trim and stick to low throttle.
Plug the speed control into the battery and check
the operation of the motor. The motor should rotate
counterclockwise when viewed from the front of the
aircraft. If the motor rotates the wrong direction, follow the
instructions provided with your speed control to correct
the rotation direction.
 Step 11
Unplug the speed control from the battery and receiver at
this time. Install the battery hatch back onto the fuselage.
 Step 12
Replace the cowling back onto the fuselage and tighten the
propeller adapter to secure it to the motor shaft.
Section 2: Motor and Cowling Installation