User Manual

29
  Step 2
Thread the strut support anchors into the holes in the
wing until the threads are no longer exposed. The anchors
have external threads.
  Step 3
Attach the strut to the strut brackets using two 4-40 x 1/2"
socket head screws and two 4-40 lock nuts. The wide strut
goes towards the leading edge, the narrow strut towards
the trailing edge.
Leading Edge of Strut
Note: The airfoil of the struts matches the
direction of the wing. The struts also have
fittings in the center, which will face towards
the wing when installed.
  Step 4
Thread a 4-40 nut onto the threaded end of the strut.
Thread a strut end onto the strut. The nut will be used
once the strut has been adjusted.
  Step 5
Install the short strut brace to the rear strut support
anchor and the long strut brace to the front strut support
anchor using 4-40 x 1/2" socket head screws and
4-40 nuts. Attach the strut supports and the strut cross
brace using two 4-40 x 1/2" socket head screws and
two 4-40 lock nuts.
Section 8: Wing Installation