User Manual

 Step 4

Use the following images as a guide for cutting the

cowling for a 4-stroke engine. Make sure to make cutouts

for the rocker box covers, exhaust and needle valve. You

will need to drill a 3/8-inch (9.5mm) hole in the cowl for

mounting the fuel dot as well.

 Step 5

Use the following images as a guide for cutting the

cowling for a 2-stroke engine. Make sure to make cutouts

for glow plug access, muffler and needle valve. You will

need to drill a 3/8-inch (9.5mm) hole in the cowl for

mounting the fuel dot as well.

Note: We used a Dubro Exhaust

Deflector (DUB697) to allow the exhaust

to exit the rear opening in the cowl.

Section 10: Cowling and Canopy Installation