User Manual

12
Required Parts
• Fuselage
Required Tools and Adhesives
• Phillips screwdriver • Propeller
• Adjustable wrench
 Step 1
Remove the plastic packaging cap from the crankshaft of
the engine.
 Step 2
Remove the propeller nut and washer from the crankshaft.
Slide the spinner backplate onto the crankshaft.
 Step 3
Slide the propeller onto the engine crankshaft. Install
the washer and nut onto the engine crankshaft. Align the
propeller so it is slightly away from the dimples of the
spinner backplate.
 Step 4
Test fit the spinner cone onto the backplate. Make sure
the gap in the spinner cone is evenly positioned around
the propeller. Reposition the propeller in relation to to the
spinner backplate if necessary.
Section 4: Spinner Installation