User Manual
13
Step 5
Use a crescent wrench to tighten the propeller nut.
Step 6
Secure the spinner cone to the spinner backplate using
two 3mm x 12mm sheet metal screws.
Required Parts
• Fuselage • Wing
• Wing bolt plate • Wing tube
• 1/4-20 x 1
1
/
2
" nylon bolt (2)
• 1
5
/
16
" (33mm) wing dowel
Required Tools and Adhesives
• Thin CA • Phillips screwdriver
Step 1
Slide the wing tube and the 1
5
/
16
" (33mm) wing dowel
into one of the wing panels.
Step 2
Slide the remaining wing panel onto the wing tube
aligning the dowel into the panel.
Step 3
Slide the 1/4-20 x 1
1
/
2
" wing bolts through the wing
bolt plate. Position the wing dowels into the holes in the
fuselage. Slide the bolts through the wing and tighten
them to secure the wing to the fuselage.
Section 5: Wing Installation
Section 4: Spinner Installation