User Manual

Note: We install a Dubro inline fuel filter

(DUB340) between the fuel tank and carburetor.

Required Parts

• Fuselage assembly • Plywood battery tray

• Motor w/hardware • Motor battery

• #4 washer (4) • Spinner assembly

• Cowling

• Hook and loop strap (long) (2)

• 8-32 x 3-inch machine screw (4)

• 60-amp electronic speed control

• #4 x 3/8-inch sheet metal screw (2)

• 4-40 x 3/8-inch socket head screw (4)

• 2

-inch (62mm) aluminum standoff (4)

Required Tools and Adhesives

• Hobby knife • Drill

• Drill bit: 5/32-inch (4mm) • Threadlock

• Hex wrench: 3/32-inch • Propeller

• Phillips screwdriver: #1 • Propeller reamer

• Rotary tool w/sanding drum

 Step 1

Use a hobby knife to remove the plywood from the

openings in the firewall. This will allow cooling air

to pass through the fuselage to keep the electronics

cooler in flight.

Section 5: Electric Motor and Cowling Installation

Section 4: Glow Engine and Cowling Installation