User Manual

28
Twin Otter ARF Assembly Manual
􀀀 􀀀 Step 6
Install the spinner backplate and propeller and secure
them with the propeller washer and nut. Use a #1
Phillips screwdriver to secure the spinner cone with
the provided #4 x 7/16-inch screws.
􀀀 􀀀 Step 4
Shown here is the cutout for the mufer. Use the
nacelle cutout made in step 29 as a guide for the
mufer opening in the cowling.
􀀀 􀀀 Step 5
Use a #1 Phillips screwdriver to install the cowling
with four #2 x 1/4-inch woodscrews.
Rudder Hinging
Parts Required
Fuselage Rudder
CA hinges (4)
Tools Required
T-pins Thin CA
􀀀 Step 1
Prepare four CA hinges by inserting a T-pin in the
center of each hinge.