User Manual

16
 Step 4
Slide the 20" (508mm) throttle pushrod into the pushrod
tube and attach the clevis to the carburetor arm.
 Step 5
Install the muffler onto your engine using the instructions
provided with the engine as a guide.
 Step 6
Install a propeller and spinner onto your engine.
Consult the instructions provided with your engine
for further details.
 Step 7
Attach the lines from the fuel tank to the engine. The
line marked "vent" will attach to the muffler, and the
remaining line connects to the carburetor.
Note: Plan on installing a needle valve
extension. It will be necessary to use a
rotary tool to provide clearance between
the extension and side of the fuselage.
 Step 8
Place the fuselage hatch into position and secure it using
the 4-40 x 1/2" socket head screw.
Section 3A: Four-Stroke Engine Installation