User Manual

24
 Step 5
Position the canopy onto the fuselage. Use a felt-tipped
pen to trace the outline of the canopy onto the fuselage.
 Step 6
Use sandpaper to lightly sand inside the line drawn on the
fuselage. Also sand the inside of the canopy where it will
rest on the fuselage.
 Step 7
Use canopy glue to secure the canopy to the fuselage.
Use masking tape to hold the canopy in position until
the glue fully cures.
 Step 8
Attach the wing to the fuselage using two 1/4-20 x 1
1
/
2
"
nylon bolts.
Section 4: Final Assembly