User Manual

Section 15: Canopy Installation
35
Step 3
Use a hobby knife and scissors to trim the canopy
along the lines drawn in the previous step.
Step 4
Position the canopy back onto the fuselage.Trace
around the canopy and onto the fuselage using
a felt-tipped pen.
Step 5
Lightly sand the inside edge of the canopy and
slightly inside the line drawn on the hatch using
medium sandpaper.
Step 6
Apply a bead of RCZ56 Canopy Glue (ZINJ5007)
around the inside edge of the canopy. Position the
canopy onto the hatch. Use tape to hold it secure
until the glue fully cures.