User Manual

STEP 2: INSTALL WALL BRACKET

Hold the wall bracket in place and install center nail rst. This will allow you to easily adjust the bracket rotation.

Insert level into slot and make sure it is level before installing the remaining nails.

STEP 3: HANG TV AND INSTALL SECURITY CABLE

Hang TV by engaging the TV bracket on top of the wall bracket, assuring the brackets have engaged correctly. (See below)

(Each nail holds 10 lbs.)

Slide level into slot.

Wall Wall

Correct Incorrect

STEP 1: INSTALL TV MOUNTING BRACKET

Place the TV face down on a soft surface where it is secure and stable. If your TV is

already attached to a base, it must be removed before beginning the installation.

The VESA holes on the back of the TV are either 4mm, 5mm, 6mm, 8mm depending

on the brand of the TV. This kit includes all sizes.

For Installation in Drywall

For other wall types please use our Simple Mount TV Hanger (S2060-SF).

DO NOT USE THESE HOLES

USE TOP HOLES ONLY

TV can be tilted away

from wall for cable access.

Attach TV mounting bracket to the top 2 holes using the

appropriate bolts. This kit also includes different lengths

of each size. Hand tighten to choose appropriate length

then use a handheld Phillips screwdriver and tighten

until snug.

Do not overtighten.

IMPORTANT

TOO SHORT

USE WASHERS IF BOLTS

ARE TOO LONG

CORRECT

TOO LONG

Insert Cable through the slot on the bracket.

Security Cable Installation

Hang TV and insert BearClaw security screw through the eyelet and into the wall.