Quick Guide

Test aperture
Calibration Cover
Screen
Test button
ColorMeter Pro
Operation Instruction
Product introduction
Please read this manual carefully before using the
product.
Quick guide
Parameters
Product name:
Colorimeter
Geometry and Angle: D/8-SCI
Calibration: Automatic
Color Value: Spectral Reflectance
CIE-Lab,CIE-LCh,HunterLab,CIE-Luv,XYZ,Yxy,RGB
ColorDifference(ΔE*ab,ΔE*cmc,ΔE*94,ΔE*00)
WI(ASTM E313-00,ASTM E313-73,CIE/ISO,AATCC
Hunter,TaubeBergerStensby)
YI(ASTM D1925,ASTM E313-00,ASTM E313-73)
Blackness(My,dM)，Color fastness,Tint(ASTM E313-00)
ColorDensity(CMYK(A,T,E,M)),Milm
Munsell,Opacity,Dye strength,ColorStrength
Light source: LED(Full Scale Visible Wavlength Range)
Lighting condition: A,B,C,D50,D55,D65,D75,F1,F2,F3,F4,F5,F6
F7,F8,F9,F10,F11,F12,CWF,U30,DLF,NBF,TL83,TL84,U35
Angle of field: 2°,10°
Lighting source: LED(Full Scale Visible Wavlength Range)
Repeatability: dE*ab≤0.1
Aperture: 8mm
Wavelength Interval: 10mm
Wavelength Range: 400-700nm
Measurement Time: ＜1sec
Battery: 10,000 continuous test per-charge
Screen: ColorLCD,135*240,1.14inch
Interface: Bluetooth and USB
Warning
·Do not attempt to disassemble or replace any part of the equip-
ment.Please contact the agent or official customer service for
after sales service.
·Do not place the equipment near heat source or directly expose to
the fire.
·If any liquid enters the equipment,please power off the equipment
immediately.
·This product contains small parts.It may cause suffocation and
other hazards,if swallowed by children.
Thank you for purchasing ColorMeter Pro
Qualified
Tested
Warranty instructions
Non warranty regulations
1.Unauthorized repair,misuse,accident,modification,use of non-
official accessories.
2.Instrument is out of warranty.
3.Damage caused by force.
4.Not the performance failure listed in the product performance
failure table.
5.Performance failure caused by human factors.
Reminder
It is recommend that keep the packing box for at least 30 days
as the packing box is required to ensure the safety of transportation.
Product performance failure table
Name Performance failure
*Parameters are subject to change without notice
1 . The equipment can't power on.
2 . The equipment’s button can't work normally.
3
. Equipment screen fails to work normally.
4
. Equipment lightsource fails to work normally.
5 . Bluetooth can't connect.
ColorMeter Pro
2.Power on and measure
1.Scan QR code to get mobile App
3.How to measure color difference
Long press 5s
Power on
or
APP Measurement
4.Power off
Measurement
standard
Measure the sample to
get the color difference
Transfer to test
the sample
Long press 2s
L*:89.6
a*:75.9
b*:15.5
L*:89.6
a*:75.9
b*:15.5
L*:89.6
a*:75.9
b*:15.5
L*:50.9
a*:13.5
b*:14.4
dL*: 2.8
da*: -1.5
db*: 1.9
dE*ab: 3.7
dL*:--
da*:--
db*:--
dE*ab:--
Fail
Manufacturer: Hangzhou CHNSpec Technology Co.,Ltd
Address: No.166,Wenyuan North Road,Jianggan District
Hangzhou,China
Tel: [phone]
Website: www.chnspec.com
Contact