User's Manual

6
3. Installing the Detector
1) Fix the angle bar to the base by pushing the bar into the hole
on the base.
2. Installing the Base
Secure the base to the selected position with the foam sticker or
the screws.
Make sure the installation surface is flat and clean.
Securing with the Foam Sticker
- Paste the foam sticker onto the back of the base.
- Stick the base onto the installation surface.
Securing with Screws
- Drill two screw holes according to the base.
- Align the holes on the base with the drilled holes.
- Push the screws into the screw holes to secure the base with wall.