Package Contents Doorbell Chime Mounting Plate Screw Kit Foam Sticker Drill Template Pin Power Cable Quick Start Guide 1
Basics Doorbell Dismantle Hole Mounting Hole PIR Lens LED Indicator Power Button Doorbell Button Mounting Hole Name Description LED Indicator • Slow-Flashing Red: Charging. • Solid Blue: Doorbell is fully charged. Power Button • Short press for 1 second: Start doorbell. • Long press for 5 seconds: Shutdown doorbell. Chime Antenna Micro SD Card Slot (For video storage) LED Indicator Reset Button Name Description LED Indicator • Solid Red: Chime is starting up.
Operations Start Devices 1. Short press the power button for 1 second on the doorbell. Doorbell rings which indicates that startup is complete. 2. Plug the chime into a power outlet. When the LED indicator is fast-flashing blue, it is ready for Wi-Fi connection. Power Outlet LED Indicator It is recommended to put the chime and doorbell within 3 meters. Add to EZVIZ App 1. Create a user account. -- Connect your mobile phone to Wi-Fi (suggested). -- Search for "EZVIZ" in the App Store or Google PlayTM.
-- Scan the QR code on the body of the chime. -- Follow the EZVIZ app wizard to finish Wi-Fi configuration. The doorbell will connect to the network by automatically connecting to the chime. If the network connection of doorbell fails, you can adjust the position of doorbell or chime. It is recommended to put them within 3 meters. Installation • It is recommended to install the doorbell in indoor entrance such as apartments, to avoid direct exposure to outdoor environment.
Option 1(Recommended) Drill Template Mounting Plate Anchors Doorbell Metal Screws When fixing the mounting plate with metal screws, keep the mounting plate undeformed to ensure that the doorbell is well buckled. Option 2 Foam Sticker Mounting Plate Doorbell Please paste the foam sticker and mounting plate to smooth surface. Maintenance When the doorbell battery is low, use the pin to remove the doorbell from the mounting plate for charging (shutdown the doorbell if tamper alarm is triggered).
Regulatory Information This product and - if applicable - the supplied accessories too are marked with "CE" and comply therefore with the applicable harmonized European standards listed under the Radio Equipment Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU. 2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted municipal waste in the European Union.
FCC Information Please take attention that changes or modification not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. FCC compliance This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
