User's Manual

Installation

The detector can be put on the table, or be sticked on where you want through the

double-sided tape at the bottom of the detector. The following installation positions

and angles are only for reference.

1. 1.8m Wall Mount

For better detection effect, please make the side with installation instruction mark

and EZVIZ logo faces the ground as shown in the gure below.

We all get

discovered!!!

6°

0°

1.8 m

So are we!!!

Fig. 1 Side view of the detection range

• After you have installed the detector, you need to adjust the angle of the detector to

get appropriate detection range.

• The detection angle of the detector are 90° vertically and horizontally.

• The detector should be placed facing an area where people often walk across, and

there should be no obstacles in front of the detector.

• Do not install the detector at places with intense direct sunlight or places where

temperature changes greatly (near air conditions, refrigerators, electric fans, ovens,

windows, and more).

• Before sticking the dector, clean the surface rst. Do not stick the detector on

limewashed walls.