User's Manual

Add Device

The open/close detector should be used along with EZVIZ Smart Gateway (afterinafter

referred to as "gateway"). Please add the gateway to the EZVIZ cloud, and then add the

detector to the gateway by the following two methods.

1. Method One: Add by Scanning QR Code

1. Log in to your account through EZVIZ app, tap the device adding icon and

then the QR code scanning interface will be displayed.

2. Scan the QR code on the inner side of the cover or on the user manual, and

then add the detector to the controller.

Scan QR Code

3. Place the detector as displayed in the gure below.

4. Place the cover back.

2. Method Two: Add by the Gateway

When adding detector by the gateway, place the detector as close to the gateway as

possible.

1. Make the gateway enter device adding mode as instructed by the user

manual of the gateway

2. Press and hold the RESET button for over 5 seconds until the indicator on the

detector flashes rapidly blue, and then the detector will enter adding mode.

3. The detector will be added to the

gateway automatically.