User's Manual

User Manual of DS-1600KI Network Keyboard
8
Set and Call Patrol
Purpose
Have the PTZ moving among several presets. PTZ will stay in a preset for a duration before moving
on to the next preset.
Step 1 Preview speed dome image. For detailed steps, refer to 3.3.1 Preview by Operating
Touchscreen and 3.3.2 Preview by Operating Keyboard Shortcut.
Step 2 Press SET to start setting. The SET button turns red.
Step 3 Press Num + Patrol to select which patrol to set.
 Preset: It determines the order at which the PTZ will follow while moving through the
patrol.
 Speed: It defines the speed at which the PTZ will move from one preset to the next.
 Duration: It refers to the time span to stay at the preset.
Figure 3-3 Set Patrol
Step 4 Press Num + ENTER to select preset.
Step 5 Press Num + ENTER to set duration.
Step 6 Press Num + ENTER to set speed.
If you press Num + PATROL during step 4 to 6, the settings will be cleared.
Step 7 Repeat step 4 to 6 to set more points of the patrol.
Step 8 Press SET to finish setting.
Step 9 Press Num + PATROL to call the patrol.