User's Manual

User Manual of DS-1600KI Network Keyboard
1
Chapter 1 Activation
You can activate network keyboard via local menu or SADP client.
1.1 Local Menu Activation
Purpose
For the first-time access, you need to activate the network keyboard by setting an admin password.
No operation is allowed before activation.
Step 1 Connect your network keyboard power supply to an electrical outlet. And turn on the
network keyboard.
Step 2 Set password.
We highly recommend you create a strong password of your own choosing (Using a minimum of 8
characters, including at least three of the following categories: upper case letters, lower case
letters, numbers, and special characters.) in order to increase the security of your product. And we
recommend you reset your password regularly, especially in the high security system, resetting the
password monthly or weekly can better protect your product.
Step 3 Tap Activate.
1.2 SADP Activation
SADP software is used for detecting the online device, activating the device, and resetting its
password.
Get the SADP software from the supplied disk or the official website, and install the SADP
according to the prompts.
Step 1 Connect your network keyboard power supply to an electrical outlet. And turn on the
network keyboard.
Step 2 Run the SADP software to search the online devices.
Step 3 Check the keyboard status from the device list, and select the inactive keyboard.