User's Manual

FocSign Client • User Manual
17
Chapter 5 Terminal Management
Only after adding terminals to the server, you can release programs to the terminals and manage
the added terminals, including start up/shut down terminal startup/shutdown, adjust terminal
volume adjustment and brightness adjustment, etc.
Add a Terminal
You can add terminals via the following methods:
 If the client and the terminals are in the same network segment, activate terminals from the
Online Device and do the CMS registration.
 If the client and the terminals are not in the same network segment and you have obtained
the IP addresses of the terminals, do the CMS registration directly.
Activate a Terminal
If the client and the terminal are in the same network segment, you can activate the terminal via
the client. If the client and the terminal are not in the same network segment, you can only
activate the terminal on the terminal. For details, please see the quick start guide.
Before you start:
The terminal is on and is in the same network segment with the client.
Click Terminal in the menu bar.
Click in Online Device to view online terminals.
Select the terminal to be activated.
Click Activate.