User's Manual

Table Of Contents

FocSign Client • User Manual

 Custom

Enable Custom. The resolution supported ranges from 480 × 320 to 3840 × 2160.

Enable Logo, and the terminal will display the default logo when powering on.

Select Terminal and the terminal to be configured in the terminal list.

Select Terminal Configuration -> Device Operation -> Logo.

Enable Logo.

Select the desired terminal and click OK.

If no program or cut-in is played in the terminal, you can enable the default schedule.

Before you start:

You have created default schedules and released the schedules to the terminal. Please see 6.3.3

Create a Default Schedule.

Select Terminal and the terminal to be configured in the terminal list.

Select Terminal Configuration -> Device Operation -> Default.

Enable Default Schedule.

Select the desired terminal and click OK.

According to the selected time zone, the terminal will automatically adjust the time of time zone.

Select Terminal and the terminal to be configured in the terminal list.

Select Terminal Configuration -> Device Operation -> Time Zone.

Select the time zone and the desired terminals, and click OK.

Enable NTP Time Sync to sync the time between terminals and the NTP server. Disable NTP Time

Sync, and the server registered synchronizes the time of the terminals, after that, you need to

synchronize the time of the terminals manually.

Select Terminal -> Terminal Configuration -> NTP Time Sync.