User's Manual

FocSign Client • User Manual
25
Enable NTP Time Sync by using either of the following methods:
Select IP Address Mode Settings, enter the IP address providing with the time sync function
and select the time sync frequency.
Select Domain Mode Settings, enter the domain of the server providing with the time sync
function and select the time sync frequency.
Select the desired terminal and click OK.
To increase terminal security, you are recommended to change the passwords of your terminals
regularly.
Select Terminal and the terminal to be configured in the terminal list.
Select Terminal Configuration -> Device Operation -> Password.
Enter Old Password, set New Password and confirm it.
8 to 16 characters allowed, including at least 2 of the following types: digits, lower-case letters,
upper-case letters and special characters. You are required to set a strong password.
Select Terminal -> Terminal Configuration -> Additional Component Information.
On Additional Component Information interface, you can check the version of the additional
component and whether it can be upgraded.
Link terminals with network cameras (IPCs) to receive information from network cameras.
Up to 8 conventional network cameras can be added.
Select Terminal and the terminal to be configured in the terminal list.
Select Terminal Configuration -> Terminal Linkage -> Channel Linkage.