User's Manual
Table Of Contents
- Chapter 1 Product Introduction
- Chapter 2 Server Installation
- Chapter 3 Login
- Chapter 4 Organization Creation
- Chapter 5 Terminal Management
- Chapter 6 Program Creation and Release
- 6.1 Upload Materials
- 6.2 Create Programs
- 6.2.2 Configure Basic Program Settings
- 6.2.3 Configure Page
- 6.2.4 Add a Window
- Add a Picture Window
- Add a Video Window
- Add an Audio Window
- Add a TXT Window
- Add a PDF Window
- Add an APP Window
- Add a Web Window
- Add a Clock Window
- Add a Countdown Window
- Add a Weather Window
- Add a Pop-up Window
- Add a Capture Window
- Add a Stream Media Window
- Add an IPC Material Window
- Add a Web URL Window
- Add a Picture URL Window
- Add a Call Window
- Add a Text Input Window
- Add a Button Window
- 6.2.5 Edit Page
- 6.2.6 Hyperlink
- 6.3 Create a Program Schedule
- 6.4 Approve
- 6.5 Release
- Chapter 7 Maintenance Management
FocSign Client • User Manual
28
To increase security, you are recommended to turn off SADP after server configuration. This
function is only for the professional technical support to debug the device.
Select Terminal -> Terminal Configuration -> Security.
Check/uncheck Enable SADP as needed.
Select the desired terminal and click OK.
The function is only for the professional technical support to debug terminals.
Select Terminal -> Terminal Configuration -> Terminal Debugging.
Enable Terminal Debugging.
Enter the debugging command and select the desired terminal(s).
Click OK.
Select Terminal -> Terminal Configuration -> Terminal Network.
Enter and edit network parameters such as IP Address, Subnet Mask and Gateway.
Click OK.
If the terminal is abnormal, you can restore it to default settings.
Select Terminal and the terminal to be configured in the terminal list.
Click Restore in Terminal Operation.
Restore defaults, and only the schedules or default programs played in the terminals, the cut-in
programs, materials and messages, the information of the linked IPCs, the registered server
information, the terminal activation status and resolution can be kept.