User's Manual

User Manual of Network Camera

Figure 6-21 SMS Alarm Settings

3) Input the mobile phone number for the white list, check the checkbox of

Reboot via SMS, select the alarm for SMS push, and click OK.

Note: To reboot the device via SMS, send the message "reboot" to the device,

and the device will reply a message "reboot success" after rebooting

succeeded.

4) (Optional) You can click Send Test SMS to send a message to the mobile

phone for test.

5) Click Save to save the settings.

6.3.10 Email Sending Triggered by Alarm

Purpose:

The system can be configured to send an Email notification to all designated receivers

if an alarm event is detected, e.g., motion detection event, video loss, video tampering,

etc.

Before you start:

Please configure the DNS Server settings under Basic Configuration > Network >

TCP/IP or Advanced Configuration > Network > TCP/IP before using the Email

function.

Steps:

1. Enter the TCP/IP Settings (Configuration > Basic Configuration > Network >

TCP/IP or Configuration > Advanced Configuration > Network > TCP/IP) to