User's Manual

Note
You should purchase the gang box separately.
Figure 3-4 Install Gang Box
2. Use 4 supplied scr
ews (M4) to secure the mounng plate on the gang box.
Figure 3-5 Install Mounng Plate
3. R
oute the cables through the cable hole of the mounng plate, and connect to the
corresponding peripherals cables.
4. Buckle into the mounng plate aer aligning the device with the mounng plate. Use 1 supplied
screw (M3) to secure the device on the mounng plate.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
6