User's Manual

Chapter 6 Quick Operaon
6.1 Select Language
You can select a language for the device system.
Aer the device acvaon, you can select a language for the device system.
By default, the system language is English.
6.2 Set Applicaon Mode
Aer acvang the device, you should select an applicaon mode for beer device applicaon.
Steps
1. On the Welcome page, select Indoor or Others from the drop-down list.
Figure 6-1 Welcome Page
2. T
ap OK to save.
Note
• You can also change the sengs in S
ystem Sengs.
• If you install the device indoors near the window or the face recognion funcon is not
working well, select Others.
• If you do not congure the applicaon mode and tap Next, the system will select Indoor by
default.
• If you acvate the device via other tools remotely, the system will select Indoor as the
applicaon mode by default.
DS-K1A340 Series Face Time Aendance Terminal User Manual
11