User's Manual

Add Administrator
The administrator can log in the device and congure the device parameters.
Steps
1. Long tap on the inial page and log in the backend.
2. T
ap User → + to enter the Add User page.
3. Edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
4. T
ap the Name eld and enter the user name.
Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• Up to 32 characters are allowed in the user name.
5. Select the departmen
t.
Note
For details about adding a department, see Manage Departmen
t via Mobile Web Browser .
6. Oponal: Add a f
ace picture, or ngerprints for the administrator.
Note
• For details about adding a face picture, see Add F
ace Picture .
•
Note
For details about adding a ngerprint, see Add Fingerprin
t .
7. Oponal: Se
t the administrator's authencaon type.
Note
For details about seng the
authencaon type, see Set Authencaon Mode .
8. Select the User R
ole.
9. Tap
to save the
sengs.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
22