User's Manual

Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• The suggested user name should be within 32 characters.
5. T
ap the Fingerprint eld to enter the Add Fingerprint page.
6. Follow the instrucons to add a ngerprint.
Note
• The same ngerprint cannot be repeatedly added.
•
Up to 10 ngerprints can be added for one user.
• You can also use the client soware or the ngerprint recorder to record ngerprints.
For details about the instrucons of scanning ngerprints, see Tips for Scanning Fingerprint .
7. Se
t the user role.
Administrator
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
8. T
ap
to save the
sengs.
View Password
Add a password for the user and the user can authencate via the password.
Steps
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and log in
the back
end.
2. Tap User → + to enter the Add User page.
3. Tap the Employee ID. eld and edit the employee ID.
Note
• The employee ID should be less than 32 characters. And it can be a combinaon of lower
leers, upper
leers, and numbers.
• The employee ID should not be duplicated.
4. T
ap the Name eld and input the user name on the so keyboard.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
25