User's Manual

Note
• Numbers, upper case leers, lower case leers,
and special characters are allowed in the user
name.
• The suggested user name should be within 32 characters.
5. T
ap the Password to view the password.
Note
The password cannot be edited. It can only be applied by the plaorm.
6. Se
t the user role.
Administrator
The user is the administrator. Except for the normal aendance funcon, the user can also
enter the Home page to operate aer authencang the permission.
Normal User
The User is the normal user. The user can only authencate or take aendance on the inial
page.
7. Tap
to save the
sengs.
Set Authencaon Mode
Aer adding the user's face picture, password, or other credenals, you should set the
authencaon mode and the user can authencate his/her identy via the congured
authenc
aon mode.
Steps
1. Long tap on the inial page for 3 s and slide to the le/right by following the gesture and log in
the back
end.
2. Tap User → Add User/Edit User → Authencaon Mode .
3. Select the authencaon mode.
Cus
tom
You can combine dierent authencaon modes together according to your actual needs.
4. Tap
to save the sengs.
Search and Edit User
Aer adding the user, you can search the user and edit it.
Search User
On the User Management page, Tap the search area to enter the Search User page. Enter the
emplo
yee ID, or the user name for searching. Tap
to search.
DS-K1A340 Series Face Time Aendance Terminal User Manual
26