User's Manual

Note
• If the aendance rules conict with the normal shi period, the device will prompt "Incorrect
Time Duraon". Delete all congured me
duraons and reset aer exing.
• The shi name supports numbers, uppercase leers, lowercase leers, Chinese characters
and symbols.
• Up to 32 characters are allowed in the shi name.
4. T
ap OK to save the sengs.
5. Oponal: Add shi.
1) Tap + in the upper right of the Normal Shi Management page to add shi.
2) Set shi name, start me and end me in order.
3) Tap
in the upper right of the add shi page to save the sengs.
Set Man-Hour Shi
Set the man-hour shi parameters, including the shi name, the work duraon, the latest on-work
me, and the break
me. You can also reset the man-hour shi aer eding.
Steps
1. Tap Local T&A → Shi Management → Man-Hour Shi Management to enter the page.
Figure 7-10 Man-Hour Shi
2. T
ap + in the upper right of the Man-Hour Shi page to add the shi.
3. Set shi name, work duraon, latest on-work me and add break me.
Note
• Break me is not recorded as working duraon.
• If the latest on-work me is set as 0, this feature is disabled by default.
4. T
ap
in the upper right of the add shi page to save the sengs.
DS-K1A340 Series Face Time Aendance Terminal User Manual
29