User's Manual

Note
The
funcon should be used cooperavely with me and aendance funcon on the client
soware.
7.4.1 Disable Aendance Mode via Device
Disable the aendance mode and the system will not display the aendance status on the inial
page.
T
ap T&A Status to enter the T&A Status page.
Figure 7-12 Disable Aendance Mode
Set the Aendance Mode as Disable.
You will not view or congure the aendance status on the inial page. And the system will follow
the aendance rule that congured on the plaorm.
7.4.2 Set Manual Aendance via Device
Set the aendance mode as manual, and you should select a status manually when you take
aendance.
Before You Start
Add a
t least one user, and set the user's authencaon mode. For details, see User Management.
Steps
1. Tap T&A Status to enter the T&A Status page.
2. Set the Aendance Mode as Manual.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
33