User's Manual

The registered face picture will be saved to the system if you enable the funcon.
Upload Picture Aer Linked Capture
Upload the pictures captured by linked camera to the plaorm automacally.
Save Pictures Aer Linked Capture
If you enable this funcon, you can save the picture captured by linked camera to the device.
Clear All Pictures in Device
You can clear registered face pictures and captured pictures in device.
Clear Registered Face Pictures
All registered pictures in the device will be deleted.
Clear Captured Pictures
All captured pictures in the device will be deleted.
8.3.7 Set Authencaon Parameters
Set Authencaon Parameters.
Steps
1. Tap Conguraon → Access Con
trol → Authencaon Sengs .
2. Click Save.
Device Type
Main Card Reader
You can congure the device card reader's parameters. If you select main card reader, you
need t
o congure the following parameters: Card Reader Type, Card Reader Descripon,
Enable Card Reader, Max.Authencaon Failed Aempts Alarm/Alarm of Max. Failed
Aempts, Enable T
ampering Detecon and Enable Card No. Reversing.
Sub Card Reader
You can congure the connected peripheral card reader's parameters. If you select sub
card reader, you need to congure the following parameters: Car
d Reader Type, Card
Reader Descripon, Enable Card Reader, Max. Authencaon Failed Aempts Alarm/
Alarm of Max. Failed Aempts, Enable Tampering Detecon, Communicaon with
Controller Every (s) and Max. Interval When Entering Password (s).
Card Reader Type
Get card reader type.
Card Reader Descripon
Get card reader descripon. It is read-only.
Enable Car
d Reader
Enable the card reader's funcon.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
58