User's Manual

Set Captured Pictures Saving Path
Click Conguraon → Local to enter the Local page. Select a saving path from your local computer
and click Save.
You can also click Open to open the le folder to view details.
9.4.2 View Device Informaon
View the device name, language, model, serial No., QR code, version, device capacity, etc.
Click Conguraon → System → System Sengs → Basic Informaon to enter the conguraon
page.
You can view the device name, language, model, serial No., QR code, version, device capacity, etc.
9.4.3 Set Time
Set the device's me zone, synchronizaon mode, and the device me.
Click Conguraon → System → System Sengs → Time Sengs .
Click Save to save the sengs
aer the conguraon.
Time Zone
Select the device located me zone from the drop-down list.
Time Sync.
NTP
You should set the NTP server's IP address, port No., and interval.
Manual
By default, the device me should be synchronized manually. You can set the device me
manually or check S
ync. with Computer Time to synchronize the device me with the
computer's me.
9.4.4 Set DST
Steps
1. Click Conguraon → System → System Sengs → DST .
2. Check Enable DST.
3. Set the DST start me, end me and bias me.
4. Click Sa
ve to save the sengs.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
64