User's Manual

5. Click Save.
Report Strategy Sengs
You can set the center group for uploading the log via the ISUP protocol.
Go t
o Conguraon → Network → Basic Sengs → Report Strategy .
You can set the center group and the system will transfer logs via ISUP protocol. Click Save to save
the sengs.
Center Group
Select a cen
ter group from the drop-down list.
Main Channel
The device will communicate with the center via the main channel.
Note
N1 refers to wired network.
Plaorm Access
Plaorm access provides you an opon to manage the devices via plaorm.
Steps
1. Click Conguraon → Ne
twork → Advanced → Plaorm Access to enter the sengs page.
2. Check the checkbox of Enable to enable the funcon.
3. Select the
Plaorm Access Mode.
Note
Hik-Connect is an applicaon for mobile devices. With the App, you can view live image of the
de
vice, receive alarm nocaon and so on.
4. Cr
eate a Stream Encrypon/Encrypon Key for the device.
Note
6 to 12
leers (a to z, A to Z) or numbers (0 to 9), case sensive. You are recommended to use a
combinaon of no less than 8 leers or numbers.
5. Click Sa
ve to enable the sengs.
Set ISUP Parameters
Set the ISUP parameters for accessing device via ISUP protocol.
DS-K1A340 Series Face Time
Aendance Terminal User Manual
70