User's Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Terminal Connection
- 4 Wiring Description
- 5 Activating the Access Control Terminal
- 6 Basic Operation
Access Control Terminal
·Quick Start Guide
13
4.2 The Wiring of External Card Reader
4.2.1 The Wiring of External RS485 Card Reader
Figure 4-2 External RS485 Card Reader Connection Diagram
When connected to the external card reader, the terminal only
supports RS485 communication method (External Wiegand card
reader is not supported).
Set the dial-up of the external card reader as 2 when connected to the
access control terminal.