User's Manual

Access Control Terminal
·Quick Start Guide
42
On the door settings interface, you can set door parameters, including Controller
Authentication, Card Reader Authentication, Door Action Time, Delayed Door Alarm,
and Anti-passing Back.
Steps:
1. Move the cursor to ACS(door settings) by using direction keys in the system settings
interface.
2. Click the # key to enter the door settings interface.
Figure 6-24 Door Settings Interface
3. Edit door parameters.
Controller Authentication: Set the controller authentication mode for opening the
door, that is, Card Only, Fingerprint Only, Card/Fingerprint, Card & Fingerprint, Card
& Password, Password & Fingerprint, Card & Password & Fingerprint.
Card Reader Authentication: Set the card reader authentication mode for opening
the door, that is, Card Only, Fingerprint Only, Card/Fingerprint, Card & Fingerprint,
Card & Password, Password & Fingerprint, Card & Password & Fingerprint.
Door Action Time: Set the door action time: 1 ~ 255 s.
Delayed Door Alarm: Set the delayed door alarm threshold: 1 ~ 255 s.
Anti-Passing Back: Set whether to enable the function of anti-passing back.
 Click the key to enter and exit the editing mode.
 Click the Right/Left direction keys to choose contents.
 Click the # key to switch the mode between “Yes” mode and “No” mode.
4. Move the cursor to the OK button, and click the # key.
6.3.5 Setting the Camera
Purpose:
On the camera settings interface, you can set camera parameters.