User's Manual
Table Of Contents
- 1 Overview
- 2 Appearance
- 3 Terminal Connection
- 4 Wiring Description
- 5 Activating the Access Control Terminal
- 6 Basic Operation
Access Control Terminal
ยทQuick Start Guide
15
Signal input interface of the door status (DOOR_NC, DOOR_COM, DOOR_NO) is
used to recognize whether the door is locked. If the NC interface is connected
for opening door, the NO interface can only be connected for locking door.
4.3.2 The Wiring of Door Contact
Figure 4-4 The Installation of Door Contact