User's Manual

Note
For managing the access point group, refer to Group Managemen
t in the user manual of the
client soware.
The doors in the selected access control group will display.
3. Click a door ic
on to select a door, or press Ctrl and select mulple doors.
4. Click the following buons to control the door.
Open Door
When the door is locked, unlock it and it will be open for once. Aer the open duraon, the
door will be closed and locked again automacally.
Close Door
When the door is unlocked, lock it and it will be closed. The person who has the access
authorizaon can access the door with credenals.
Remain Open
The door will be unlocked (no maer closed or open). All the persons can access the door
with no credenals required.
Remain Closed
The door will be closed and locked. No person can access the door even if he/she has the
authorized credenals, except the super users.
Cap
ture
Capture a picture manually.
Note
The Cap
ture buon is available when the device supports capture funcon. The picture is
saved in the PC running the client. For seng the saving path, refer to Set File Saving Path in
the user manual of the client soware.
Result
The ic
on of the doors will change in real-me according to the operaon if the operaon is
succeeded.
7.9.2 Check Real-Time Access Records
The access records will display in real me, including card swiping records, ngerprint comparison
r
ecords, etc. You can view the person informaon and view the picture captured during access.
Steps
1. Click Monitoring and select a group from the drop-down list on the upper-right corner.
Access Control Terminal User Manual
90