User's Manual

The access records triggered at the doors in the selected group will display in real me. You can
view the details of the records, including card No., person name, organizaon, event me, etc.
2. Oponal: Check the e
vent type and event status so that these events will show in the list if the
events are detected. The events of unchecked type or status will not be displayed in the list.
3. Oponal: Check Show Latest Event and the latest access record will be selected and displayed
at the top of the record list.
4. Oponal: Click the event to view the accessed person details, including person pictures
(captured picture and prole), person No., person name, organizaon, phone, contact address,
etc.
Note
You can double click the captured picture to enlarge it to view the details.
5. Oponal: Righ
t click on the column name of the access event table to show or hide the column
according to actual needs.
7.10 Event Center
In the Event Center, you can view the real-me events, search the historical events and view the
pop-up alarm informaon.
Before the client can receive the event informaon from the device, you need to arm the device
rst. For details, refer to E
nable Receiving Events from Devices .
Before the you can view the pop-up alarm informaon, you need to enable alarm triggered pop-up
imag
e in the event center. For details, refer to .
7.10.1 Enable Receiving Events from Devices
Before the client can receive the event informaon from the device, you need to arm the device
rst.
Steps
1. Click → Tool → De
vice Arming Control open Device Arming Control page.
All the added devices display on this page.
2. In the Operaon column, turn on the switch to enable auto-arming, or click Arm All t
o arm all
the devices.
Access Control Terminal User Manual
91