User's Manual

Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
5. Check S
ynchronize Time to synchronize the device me with the PC running the client aer
adding the device to the client.
6. Oponal: Check Import to Group to create a group by the device name, and import all the
channels of the device to this group.
Example
For access control device, its access points, alarm inputs/outputs, and encoding channels (if
exist) will be imported to this group.
7. Click Add.
Add Mulple Detected Online Devices
For detected online devices sharing the same user name and password, you can add them to the
clien
t in a batch.
Before You Start
Make sure the to-be-added devices are online.
Steps
1. Enter the Device Management module.
2. Click Device tab on the top of the right panel.
3. Click Online Device to show the online device area at the boom of the page.
The sear
ched online devices are displayed in the list.
4. Select mulple devices.
Note
For the inacve device, you need to create the password for it before you can add the device
properly. For details, refer to .
5. Click Add to open the device adding window.
6. Enter the required informaon.
User Name
By default, the user name is admin.
Password
Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
Access Control Terminal User Manual
47