User's Manual

Enter the device password.
Cauon
The password strength of the device can be automacally checked. We highly recommend
y
ou change the password of your own choosing (using a minimum of 8 characters, including
at least three kinds of following categories: upper case leers, lower case leers, numbers,
and special characters) in order to increase the security of your product. And we recommend
you change your password regularly, especially in the high security system, changing the
password monthly or weekly can beer protect your product.
Proper conguraon of all passwords and other security sengs is the responsibility of the
installer and/or end-user.
6. Oponal: Check S
ynchronize Time to synchronize the device me with the PC running the client
aer adding the device to the client.
7. Oponal: Check Import to Group to create a group by the device name.
Note
You can import all the channels of the device to the corresponding group by default.
8. Finish adding the de
vice.
-
Click Add to add the device and back to the device list page.
-
Click Add and New to save the sengs and connue to add other device.
9. Perform the following operaons aer adding the devices.
Remote
Conguraon
Click
on Operaon column to set remote conguraon of the
c
orresponding device.
Note
• For some models of devices, you can open its web window. To open
the original r
emote conguraon window, press Ctrl and click
.
•
For detail operaon steps for the remote conguraon, see the user
manual of the de
vice.
Device Status Click on Operaon column to view device status.
Add Devices by IP Segment
If you want to add devices of which the IP addresses are within an IP segment, you can specify the
s
tart IP address and end IP address, user name, password, and other parameters to add them.
Steps
1. Enter the Device Management module.
2. Oponal: Click
on the right of De
vice Management and select Device.
The added devices are displayed in the list.
Access Control Terminal User Manual
49